Heads Up Car Display 3.5 Inch A200 HUD with OBD2 Interface Plug
Play Speed Display
Before buy this product pls read below
if you still can not sure whether your car is OBDii or not, pls
contact us before you buying,
it can not work with JOBD and obdi interface,thanks
Compatibled with the most of Eurpean and USA brand car after 2003
As like Audi ,BMW, Cadillac Chevrolet, Benz, Buick ,Volkswagen Etc
Brand Car,it is well compatibled,
for Korea and japan brand car,Some cars after 2010 year produced
can be compatibled,
as like Honda, TOYOTA etc brand ,it is well compatibled, other some
car ,as like KIA,Mazda,
SsongYong,SUZUKI etc, it is bad Compatibled.
please contact us before buy this goods,thanks
HUD is short for Head Up Display. It displays driving datas on the
front windshield such as speed, rpm, water temperature and voltage, avoiding drivers become dangerous because
of watching the instrument while driving.
Drivers can read the driving information instantly, and can always
keep the best state on the way with HUD.
HUD Main Features:
1. Plug and Play connectivity with any OBDII or EUOBD capable
2. Screen 3.5 inch HD display
3. Multi-color design makes the screen more abundant and easier to
4. Nano-technology to eliminate double reflections,more clear.
5.Rich Contents: speed,RPM,water temperature,voltage,low voltage
alarm,high water temperature alarm,over speed alarm, fatigue
driving alarm,freely switch between kilometers&miles.
6. Auto power on/off: HUD start and off with vehicle started and
shutdown, effective protection of the car battery;retaining the
manual switch mode,more easy to control HUD.
7. 5-level brightness adjustment,automatic and manual brightness
8. Automatic and manual adjustment for high water temperature alarm
9. Automatic and manual adjustment for low voltage alarm
10. Automatic and manual adjustment for fatigue driving alarm
Parameter for A200 obd2 HUD
HUD size: 90x54x12mm
HUD weight: 40g
Package box: 17x13x4.5cm
Package weight: 205g
HUD keys function:
1. OBDII cable input
2. Power button
3.Three way wave button:
a.Up button = up motion
b.Ok button = inward button press
c.Down button = down motion
car HUD body - 1pc
OBD cable - 1pc
reflection film - 1pc
anti-slip mat - 1pc
English Manual - 1pc
Plug and Play. Just need connect car OBD2 interface by OBD cable.
Methods of pasting the film:
Using the unit without the reflective film may result in a double
image observed by the user depending on the windshield. If you see
a double layer it is due to the windshields dual layer construction
and you should install the film by following the instructions
1. Spray some water on the place that the film will be pasted
on,and then use a dry cloth to clean it;
2. Take off the back side(marked 1) of reflection film,then paste
it to the window glass.
3. After you have adjusted the location, you can use a scratch
board or something else flat to slick the film and squeeze the
water inside out until there is no bubble or water in it.
4. Take off the protection film (marked 2) of the reflection film.
If the film cannot display the whole information, please adjust the
non-slip mat to move the position.
You may met below problem when use HUD
1). See not clearly when HUD under the sunlight,and with double reflection.
Check whether the HUD host surface protective film is torn,and
please stick the reflection film on the windscreen.And vertical
press in the setting button for 5 seconds to enter into menu
setting when HUD is power on,short press 2 times to menu 2,adjust
the parameter to 5,vertical press in 5 seconds to save.
2). wrong operation lead to crashes. Or inaccurate datas
Do a reset setting.
3). When HUD power on, HUD only shows the car voltage and be automatic power off after 30 seconds driving.
HUD just available for cars with OBD2 agreement and EU-OBD
agreement(European region: after 03 years, Other region:after 07
HUD Products donnot support JOBD and OBDI and recommended test for
4). The HUD screen without any display,and no power
Start the car engine;check if the OBD cable line is tight;please
pull down the OBD cables more times to ensure;check if HUD power
switch turns on. If no display still,please change another car to
test, analyze whether the car OBD diagnostic interface is good, if
it is not good,please repair it and try again.